Description
18 high-power LEDs illuminate the entire fog light reflector with a clean, non-blinding glow. Switch between amber and xenon white at the flick of a toggle. Your original fog light stays fully operational.
Switch between amber and xenon white depending on your preference or local regulations.
Installation:
Remove all screws from the top of the lamp. Cut the glued heatsink along the marked edge using a hobby knife, then carefully pry apart with two flat screwdrivers.
Clean off the original glue. Drill a hole at the marked position — between two heatsink ribs is ideal for clean cable routing. Feed the cable through and seal the hole thoroughly.
Remove the two outer screws from the original board, place the included spacers, and mount the new board on top with LEDs facing outward. Fasten with the included M4x8mm screws. Reassemble and glue the lamp back together.
Connect to your existing position light circuit and enjoy.
Compatible with: Scania L, P, G, R, S-series — 2016 to 2022.