Description
Light up the reflector. Make your headlights impossible to ignore.
30 high-power LEDs completely illuminate the headlight reflector — creating a striking visual effect inside an otherwise dark housing. Switch between amber and xenon white at the flick of a toggle. A bold upgrade that works with any DRL setup, stock or modified.
Installation:
Loosen the two screws near the doors and swing the headlight to the side. Remove the large cap on top of the headlight to access the heatsink underneath.
Remove the two front screws from the heatsink. Slide the board sideways into the headlight so the two tabs align with the heatsink holes — the board must sit above the reflector and must not be visible from the front when mounted. Fasten with the two screws back through the board into the heatsink.
Feed the cable through a drilled hole in the back plate of the headlight and connect to your position light circuit.
Compatible with: Scania L, P, G, R, S-series with LED headlights — 2016 to 2026.