{"title":"DRL Conversion Kits (Scania)","description":null,"products":[{"product_id":"scania-next-gen-fog-dual-color-2016-2022","title":"Scania Next-Gen Dual Colour Fog Lights (2016-2022)","description":"\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003e18 high-power LEDs illuminate the entire fog light reflector with a clean, non-blinding glow. Switch between \u003cstrong\u003eamber\u003c\/strong\u003e and \u003cstrong\u003exenon white\u003c\/strong\u003e at the flick of a toggle. Your original fog light stays fully operational.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003eSwitch between \u003cstrong\u003eamber\u003c\/strong\u003e and \u003cstrong\u003exenon white\u003c\/strong\u003e depending on your preference or local regulations.\u003cbr\u003e\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003e\u003cstrong\u003eInstallation:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003eRemove all screws from the top of the lamp. Cut the glued heatsink along the marked edge using a hobby knife, then carefully pry apart with two flat screwdrivers.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003eClean off the original glue. Drill a hole at the marked position — between two heatsink ribs is ideal for clean cable routing. Feed the cable through and \u003cstrong\u003eseal the hole thoroughly.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003eRemove the two outer screws from the original board, place the included spacers, and mount the new board on top with LEDs facing outward. Fasten with the included M4x8mm screws. Reassemble and glue the lamp back together.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003eConnect to your existing position light circuit and enjoy.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003e\u003cstrong\u003eCompatible with:\u003c\/strong\u003e Scania L, P, G, R, S-series — 2016 to 2022.\u003c\/p\u003e","brand":"TLD","offers":[{"title":"Default Title","offer_id":57643197038924,"sku":"SNG-FOG-DC","price":75.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0259\/3583\/9294\/files\/hf_20260527_090554_3e1b19ec-785b-4f53-919a-d6756bb250c0.png?v=1779890765"},{"product_id":"scania-next-gen-additional-position-lights-dual-colour-2016-2022","title":"Scania Next-Gen Dual Colour Additional Position Lights (2016-2026)","description":"\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003e\u003cstrong\u003eLight up the reflector. Make your headlights impossible to ignore.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003e\u003cstrong\u003e30 high-power LEDs\u003c\/strong\u003e completely illuminate the headlight reflector — creating a striking visual effect inside an otherwise dark housing. Switch between \u003cstrong\u003eamber\u003c\/strong\u003e and \u003cstrong\u003exenon white\u003c\/strong\u003e at the flick of a toggle. A bold upgrade that works with any DRL setup, stock or modified.\u003cbr\u003e\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003e\u003cstrong\u003eInstallation:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003eLoosen the two screws near the doors and swing the headlight to the side. Remove the large cap on top of the headlight to access the heatsink underneath.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003eRemove the two front screws from the heatsink. Slide the board sideways into the headlight so the two tabs align with the heatsink holes — the board must sit above the reflector and must not be visible from the front when mounted. Fasten with the two screws back through the board into the heatsink.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003eFeed the cable through a drilled hole in the back plate of the headlight and connect to your position light circuit.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv\u003e\n\u003cdiv data-test-render-count=\"1\"\u003e\n\u003cdiv class=\"group\"\u003e\n\u003cdiv class=\"contents\"\u003e\n\u003cdiv data-is-streaming=\"false\" class=\"group relative relative pb-3\"\u003e\n\u003cdiv class=\"font-claude-response relative leading-[1.65rem] [\u0026amp;_pre\u0026gt;div]:bg-bg-000\/50 [\u0026amp;_pre\u0026gt;div]:border-0.5 [\u0026amp;_pre\u0026gt;div]:border-border-400 [\u0026amp;_.ignore-pre-bg\u0026gt;div]:bg-transparent [\u0026amp;_.standard-markdown_:is(p,blockquote,h1,h2,h3,h4,h5,h6)]:pl-2 [\u0026amp;_.standard-markdown_:is(p,blockquote,ul,ol,h1,h2,h3,h4,h5,h6)]:pr-8 [\u0026amp;_.progressive-markdown_:is(p,blockquote,h1,h2,h3,h4,h5,h6)]:pl-2 [\u0026amp;_.progressive-markdown_:is(p,blockquote,ul,ol,h1,h2,h3,h4,h5,h6)]:pr-8\"\u003e\n\u003cdiv\u003e\n\u003cdiv class=\"standard-markdown grid-cols-1 grid [\u0026amp;_\u0026gt;_*]:min-w-0 gap-3 standard-markdown\"\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003e\u003cstrong\u003eCompatible with:\u003c\/strong\u003e Scania L, P, G, R, S-series with LED headlights — 2016 to 2026.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"TLD","offers":[{"title":"Default Title","offer_id":57643340988748,"sku":"SNG-ADD-DC","price":90.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0259\/3583\/9294\/files\/hf_20260527_105944_efda7782-f6f3-4f70-b169-8f0465162789.png?v=1779891000"},{"product_id":"scania-next-gen-position-lights-dual-colour-2016-2022","title":"Scania Next-Gen Dual Colour Position Lights HIgh-Beam (2016-2022)","description":"\u003cp\u003eThere is a 3 meter cable on each board. There is one minus and two plus-wires. You should never have both colors turned on, so you need to use a toggle switch to change between the colors.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMinus\/ground - Brown cable\u003c\/li\u003e\n\u003cli\u003ePlus for white position light - White cable\u003c\/li\u003e\n\u003cli\u003ePlus for yellow position light - Green cable\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TLD","offers":[{"title":"Default Title","offer_id":57643448861004,"sku":"SNG-POS-DC","price":75.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0259\/3583\/9294\/files\/hf_20260527_095442_60c2b7cf-943d-494f-8276-2892aa4358b2.png?v=1779891213"},{"product_id":"scania-next-gen-led-conversion-kit-amber-2016-2022","title":"Scania Next-Gen DRL Conversion Kit (Amber) (2016-2026)","description":"\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003eSwap your factory cold white DRL for a bold amber orange. High-power LEDs mounted on an aluminium board — same design as the original — for optimal cooling and long-lasting performance.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003e\u003cstrong\u003eKit Includes :\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul class=\"[li_\u0026amp;]:mb-0 [li_\u0026amp;]:mt-1 [li_\u0026amp;]:gap-1 [\u0026amp;:not(:last-child)_ul]:pb-1 [\u0026amp;:not(:last-child)_ol]:pb-1 list-disc flex flex-col gap-1 pl-8 mb-3\"\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003e2x Amber LED boards (left + right)\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003eThermal paste for improved heat transfer\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003ePlug-and-play — uses the original connectors. No wiring required.\u003cbr\u003e\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003e\u003cstrong\u003eInstallation :\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003eThe screws for each lamp are located inside the doors. Remove them and tilt the lamp out from the body. Remove the plastic frame screwed around the lamp.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003eThe DRL boards sit on the bottom outer edge of the lamp. Loosen the lamp adjustment, remove the heatsink screws, and pull out the original board. Disconnect the connector by pressing the lock tab.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003eRemove the black fiber guide by loosening its two bolts. Note: Some models require an 8mm hole to be drilled in the fiber guide to clear all LEDs.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003eClean the heatsink thoroughly. Apply thermal paste and mount the new board. Reassemble the lamp.\u003c\/p\u003e","brand":"TLD","offers":[{"title":"Amber","offer_id":57652749795660,"sku":"SNG-DRL-AMBER","price":70.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0259\/3583\/9294\/files\/hf_20260527_102107_3c449cf8-7d15-453a-ab41-992bc1149a1f.png?v=1779891514"},{"product_id":"scania-next-gen-led-conversion-kit-white2016-2022","title":"Scania Next-Gen DRL Conversion Kit (White) (2016-2026)","description":"\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003eSwap your factory DRL color for a clean xenon white. High-power LEDs mounted on an aluminium board — same design as the original — for optimal cooling and long-lasting performance.\u003cbr\u003e\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003e\u003cstrong\u003eKit Includes : \u003c\/strong\u003e\u003c\/p\u003e\n\u003cul class=\"[li_\u0026amp;]:mb-0 [li_\u0026amp;]:mt-1 [li_\u0026amp;]:gap-1 [\u0026amp;:not(:last-child)_ul]:pb-1 [\u0026amp;:not(:last-child)_ol]:pb-1 list-disc flex flex-col gap-1 pl-8 mb-3\"\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003e2x Xenon white LED boards (left + right)\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003eThermal paste for improved heat transfer\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003ePlug-and-play — uses the original connectors. No wiring required.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003e\u003cstrong\u003eInstallation :\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003eThe screws for each lamp are located inside the doors. Remove them and tilt the lamp out from the body. Remove the plastic frame screwed around the lamp.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003eThe DRL boards sit on the bottom outer edge of the lamp. Loosen the lamp adjustment, remove the heatsink screws, and pull out the original board. Disconnect the connector by pressing the lock tab.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003eRemove the black fiber guide by loosening its two bolts. \u003cstrong\u003eNote :\u003c\/strong\u003e Some models require an 8mm hole to be drilled in the fiber guide to clear all LEDs\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003eClean the heatsink thoroughly. Apply thermal paste and mount the new board. Reassemble the lamp.\u003c\/p\u003e","brand":"TLD","offers":[{"title":"White","offer_id":57652742848844,"sku":"SNG-DRL-WHITE","price":70.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0259\/3583\/9294\/files\/hf_20260527_104846_28ef9005-d064-4d38-9b8a-1458f67993d7.png?v=1779891802"},{"product_id":"scania-next-gen-dual-color-position-light-high-beam-2016-2022","title":"Scania Next-Gen Dual Color Position Lights Top High-Beam (2016-2022)","description":"\u003cp\u003eEach board features 6 high-power LEDs that illuminate the existing reflector — turning your stock roof lamps into bright, clean dual color position lights.\u003cbr\u003e\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003e\u003cstrong\u003eDual Color\u003c\/strong\u003e Two colors in one board. One minus wire, two plus wires — one per color. Use a toggle switch to switch between colors. \u003cstrong\u003eNever run both colors simultaneously.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003eCable length: 3 meters per board.\u003cbr\u003e\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003e\u003cstrong\u003eInstallation\u003c\/strong\u003e Remove the lamp from its frame. Use the included drilling template on the lamp base — drill one 20mm hole and two 3.5mm mounting holes. Clear all debris before fitting.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003eFeed the board through the large hole. Secure with the included M3 bolts through the two small holes into the solder-nuts on the board. \u003cstrong\u003eApply thread glue to bolt heads to seal against water ingress.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003eSeat the rubber gasket firmly into the hole. Apply silicone grease to the gasket for a watertight seal.\u003c\/p\u003e","brand":"TLD","offers":[{"title":"Default Title","offer_id":57644067062092,"sku":"SNG-SPOT-DC","price":80.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0259\/3583\/9294\/files\/hf_20260527_100951_93972ce9-b4a0-4bd8-9d70-051b01c38b56.png?v=1779892569"},{"product_id":"scania-next-gen-dual-color-position-lights-high-beam-2023","title":"Scania Next-Gen Dual Color Position Lights High-Beam (2023+)","description":"\u003ch3 class=\"text-text-100 mt-3 -mb-1 text-[1.125rem] font-bold\"\u003eScania Next-Gen Dual Colour Position Lights Top High-Beam (2023+)\u003c\/h3\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003e\u003cstrong\u003eLight up the full reflector of your Scania top high beams with dual colour.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003eMounts directly on top of the existing board — no permanent modifications needed. Switch between \u003cstrong\u003eamber\u003c\/strong\u003e and \u003cstrong\u003exenon white\u003c\/strong\u003e at the flick of a toggle, while keeping the original high beam fully functional.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003e\u003cstrong\u003eKit Includes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul class=\"[li_\u0026amp;]:mb-0 [li_\u0026amp;]:mt-1 [li_\u0026amp;]:gap-1 [\u0026amp;:not(:last-child)_ul]:pb-1 [\u0026amp;:not(:last-child)_ol]:pb-1 list-disc flex flex-col gap-1 pl-8 mb-3\"\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003e2x Dual colour LED boards (left + right)\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003eSpacers and screws\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003e3 metres of cable per board\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003e\u003cstrong\u003eWiring:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul class=\"[li_\u0026amp;]:mb-0 [li_\u0026amp;]:mt-1 [li_\u0026amp;]:gap-1 [\u0026amp;:not(:last-child)_ul]:pb-1 [\u0026amp;:not(:last-child)_ol]:pb-1 list-disc flex flex-col gap-1 pl-8 mb-3\"\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003eBrown — Ground (-)\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003eWhite — Xenon white (+)\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003eGreen — Amber (+)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003e\u003cem\u003eNever run both colours simultaneously.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003e\u003cstrong\u003eInstallation:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003eRemove all screws from the back of the heatsink to open the lamp. Remove the screws holding the original board — the original board must remain in place. Place the included spacers between the original board and the new board, then fasten everything together with the screws.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003eFeed the cable through the lamp — either through a small drilled hole or through one of the existing valve holes on the back.\u003c\/p\u003e","brand":"TLD","offers":[{"title":"Default Title","offer_id":57705199370572,"sku":"SNG-POS-DC-2023","price":80.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0259\/3583\/9294\/files\/ScaniaNext-GenDualColorPositionLightsHigh-Beam_2023.jpg?v=1780566625"},{"product_id":"scania-next-gen-dual-color-position-lights-top-high-beam-2023","title":"Scania Next-Gen Dual Color Position Lights Top High-Beam (2023+)","description":"\u003ch3 class=\"text-text-100 mt-3 -mb-1 text-[1.125rem] font-bold\"\u003eScania Next-Gen Dual Colour Position Lights Top High-Beam (2023+)\u003c\/h3\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003e\u003cstrong\u003eLight up the full reflector of your Scania top high beams with dual colour.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003eMounts directly on top of the existing board — no permanent modifications needed. Switch between \u003cstrong\u003eamber\u003c\/strong\u003e and \u003cstrong\u003exenon white\u003c\/strong\u003e at the flick of a toggle, while keeping the original high beam fully functional.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003e\u003cstrong\u003eKit Includes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul class=\"[li_\u0026amp;]:mb-0 [li_\u0026amp;]:mt-1 [li_\u0026amp;]:gap-1 [\u0026amp;:not(:last-child)_ul]:pb-1 [\u0026amp;:not(:last-child)_ol]:pb-1 list-disc flex flex-col gap-1 pl-8 mb-3\"\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003e2x Dual colour LED boards (left + right)\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003eSpacers and screws\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003e3 metres of cable per board\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThere is 3 meter cable on each board. There is one minus and two plus-wires. You should never have both colors turned on, so you need to use a toggle switch to change between the colors.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMinus\/ground - Brown cable\u003c\/li\u003e\n\u003cli\u003ePlus for white position light - White cable\u003c\/li\u003e\n\u003cli\u003ePlus for yellow position light - Green cable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003e\u003cstrong\u003eInstallation:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003eRemove all screws from the back of the heatsink to open the lamp. Remove the screws holding the original board — the original board must remain in place. Place the included spacers between the original board and the new board, then fasten everything together with the screws.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003eFeed the cable through the lamp — either through a small drilled hole or through one of the existing valve holes on the back.\u003c\/p\u003e","brand":"TLD","offers":[{"title":"Default Title","offer_id":57705212051788,"sku":"SNG-SPOT-DC-2023","price":80.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0259\/3583\/9294\/files\/ScaniaNext-GenDualColorPositionLightsTopHigh-Beam_2023.jpg?v=1780566826"},{"product_id":"scania-next-gen-dual-colour-fog-lights-2023","title":"Scania Next-Gen Dual Colour Fog Lights (2023+)","description":"\u003ch3 class=\"text-text-100 mt-3 -mb-1 text-[1.125rem] font-bold\"\u003eScania Next-Gen Dual Colour Fog Lights (2023+)\u003c\/h3\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003e36 high-power LEDs illuminate the entire fog light reflector — turning your stock fog lights into bright, dual colour position lights without losing the original fog light function.\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003eSwitch between \u003cstrong\u003eamber\u003c\/strong\u003e and \u003cstrong\u003exenon white\u003c\/strong\u003e at the flick of a toggle. Clean, non-blinding light that fills the full reflector.\u003cbr\u003e\u003cbr\u003e\u003cstrong style=\"font-size: 0.875rem;\"\u003eKit Includes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul class=\"[li_\u0026amp;]:mb-0 [li_\u0026amp;]:mt-1 [li_\u0026amp;]:gap-1 [\u0026amp;:not(:last-child)_ul]:pb-1 [\u0026amp;:not(:last-child)_ol]:pb-1 list-disc flex flex-col gap-1 pl-8 mb-3\"\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003e2x Dual colour LED boards (left + right)\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003e3 metres of cable per board\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003e\u003cstrong\u003eWiring:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul class=\"[li_\u0026amp;]:mb-0 [li_\u0026amp;]:mt-1 [li_\u0026amp;]:gap-1 [\u0026amp;:not(:last-child)_ul]:pb-1 [\u0026amp;:not(:last-child)_ol]:pb-1 list-disc flex flex-col gap-1 pl-8 mb-3\"\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003eBrown — Ground (-)\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003eWhite — Xenon white (+)\u003c\/li\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003eGreen — Amber (+)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003e\u003cem\u003eNever run both colours simultaneously.\u003c\/em\u003e\u003c\/p\u003e","brand":"TLD","offers":[{"title":"Default Title","offer_id":57705255403852,"sku":"SNG-FOG-DC-2023","price":75.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0259\/3583\/9294\/files\/ScaniaNext-GenDualColourFogLights_2023.jpg?v=1780567430"},{"product_id":"scania-l-p-g-r-s-series-drl-conversion-kit-amber-2016-halogen","title":"Scania L,P,G,R,S-Series DRL Conversion Kit (Amber) (2016+ Halogen)","description":"\u003ch3 class=\"text-text-100 mt-3 -mb-1 text-[1.125rem] font-bold\"\u003eScania L,P,G,R,S-Series DRL Conversion Kit (Amber) (2016+ Halogen)\u003c\/h3\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003e\u003cstrong\u003eSwap your stock xenon white DRL for a bold, warm amber.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003eA direct replacement for the original DRL board on Scania halogen headlights. 4 high-power CREE LEDs shine through the original 4 reflectors — matching the original brightness with both high and low brightness modes intact. \u003cbr\u003e\u003cbr\u003eSame design, same connectors — no modifications required.\u003cbr\u003e\u003cbr\u003e\u003cstrong style=\"font-size: 0.875rem;\"\u003eKit Includes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul class=\"[li_\u0026amp;]:mb-0 [li_\u0026amp;]:mt-1 [li_\u0026amp;]:gap-1 [\u0026amp;:not(:last-child)_ul]:pb-1 [\u0026amp;:not(:last-child)_ol]:pb-1 list-disc flex flex-col gap-1 pl-8 mb-3\"\u003e\n\u003cli class=\"font-claude-response-body whitespace-normal break-words pl-2\"\u003e2x Amber LED boards\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003ePlug-and-play — uses the original connectors. No wiring required.\u003cbr\u003e\u003cbr\u003e\u003cstrong style=\"font-size: 0.875rem;\"\u003eInstallation:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"font-claude-response-body break-words whitespace-normal leading-[1.7]\"\u003eUnscrew and tilt out the headlight. Remove the plastic shield at the bottom of the lamp to access the board. Remove the 3 screws and transfer the wire connectors from the original board onto the new one. Test before closing. Screw the new board in place, refit the plastic shield and turn the headlight back into position.\u003c\/p\u003e","brand":"TLD","offers":[{"title":"Amber","offer_id":57705647505740,"sku":"SNG-HLG-DRL-AMBER","price":70.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0259\/3583\/9294\/files\/ScaniaL_P_G_R_S-SeriesDRLConversionKit_Amber_2016_Halogen.jpg?v=1780569009"}],"url":"https:\/\/truck-led-design.com\/collections\/drl-conversion-kits-scania.oembed","provider":"TLD","version":"1.0","type":"link"}